Have you ever wondered how metal buildings in Mission Bend are put together or manufactured? The process is both complicated and precise. The manufacture of a metal building is an awesome combination of engineering, draftsmanship, ingenuity, teamwork, know-how and metal building manufacturing expertise. Each building receives the utmost care and attention throughout the manufacturing process, manufactured by experienced craftsmen and watched over by a dedicated staff of professionals from start to finish. Precision engineering, machinery and components plus exceptional quality control yield a precision high quality manufactured product.
Once a customer has purchased a pre-engineered metal building or metal building system, their sales person, who performs multiple functions of building consultant, building designer, technician and estimator, forwards the purchaser’s order to the steel building factory. In the top metal building factories, the factory itself fabricates all required building components in house. That way, all components are compatible and go together easily on the job site with no surprises and no waiting for components to arrive from different suppliers.
At the steel building factory, the order entry department oversees the order from start to finish, from the time the order is received until the steel building is shipped. Steel building factory staff verifies all design codes, snow and wind loads and seismic information to make sure that everything complies with the purchaser’s contract and enters the order into scheduling software to ensure that the buildings manufacture is efficiently managed.
How does one elect the best metal building to use in Mission Bend based on all the factors to consider?
I’m dying. This isn’t news I received from a doctor, it’s just the truth. I hate to break it to you, but you’re dying too. In fact, we can be fairly certain that almost anyone reading this will have taken their last breath by the end of this century. Believe it or not, the same holds true for our buildings.
I’m not stating this out of some obsession with death. I don’t have a fatalist sense that life will pass me by without a chance to leave a strong legacy for the generations that follow. Rather, I’m concerned that the places we are building won’t do the same.
A large percentage of our built environment has a surprisingly high “mortality” rate. In fact, the lifespan of a building — made of concrete, steel, wood — is shorter than that of a flesh-and-blood human. According to the U.S. Department of Energy, the average office building lifespan in 2008 was 73 years. In contrast, human life expectancy in the U.S. was 78 years. Given their similar life expectancy, one would assume we spend a comparable amount of money on a person’s shelter as we do on other essential aspects of their life, right?
The Bureau of Labor Statistics estimated in 2008 the average cost of living on food, shelter, transportation, and healthcare to be around $35,000 per year — or more than $2.7 million during a 78-year lifetime. We spend that on ourselves simply to survive. And what about the office environment where, for 45 of those 78 years, we will devote more than 50% of our waking hours? We currently spend around $200 per square foot for a conventional office building, with each worker needing roughly 200 square feet to do their job (direct work, collaboration, breaks, storage, etc.). That’s a total cost of $40,000 per person for every new building built. Additionally, according to the Building Owners and Managers Association, the average annual operating costs are about $8/sf (or $1,600/sf per person each year), which over a 45-year career yields a total operating cost per person of $72,000. In total, we’re allocating about $112,000 per person on buildings during an individual’s career.
The quick math? We spend 24x less on the facilities shaping our daily experience and health than we do on the bodies that inhabit them. Yet I’ll wager most people expect buildings to outlive them many times over.
This seems like a misalignment worth exploring, especially as we aspire to improve the health of both our cities and their citizens. Are we expecting too much from our buildings, or are we not spending enough money on them? Either way, here are two approaches that may help us start the uncomfortable conversation on the merits of “architectural euthanasia.”
Long Live the Short-Lived
As humans we’re predestined, eventually, to return to earth, ashes, and dust. Based on their similar lifespan, should buildings have the same fate? When buildings cease to change, when they cease to give back, when they cease to learn, they die. Yet we have a tendency to put them on life support, often for long periods of time. Instead of investing in “permanent” materials that, ironically, will be deconstructed in less than a century, let’s instead focus on lightweight, rapidly constructible and dismantle-able solutions as part of a flexible, component-driven system.
For instance, lightweight tensile structures are deployed throughout the globe to house sports, social venues and even laboratories, and can more broadly be considered for day-lit envelopes or inflatable facilities that disappear when not in use. Or imagine the beauty — both literal and figural — of exterior walls where reusable felt panels become both insulation and rain screen. Explorations in paper materials such as cardboard have become more prevalent, while 3-D printing affords us the opportunity to experiment with soluble materials that simply wash away after serving their purpose.
Materials for short-term buildings don’t necessarily have to be less durable, but they likely need to perform more than one function. A single material serving as structure, enclosure and window is faster and simpler to assemble — and therefore more likely to encourage a project to go up or come down. Perhaps we can learn a thing or two from millennia of nomadic lifestyles.
We started designing for human health centuries ago, and the outcome on the built environment has been noticeable. The term euthenics — the study of the improvement of human functioning and well-being by the improvement of living conditions — was coined in the 1890s when society began to stress the importance of natural light, fresh air and open space in the buildings that shape everyone’s daily life. Cast-iron façades and long-span timber elements were effective approaches to freeing up both the exterior and the floor plan. Not by coincidence, the buildings that succeeded in doing this best a hundred years ago are some of today’s most sought-after real estate investments.
Some of our biggest challenges with structures derive from our failure to foresee the continual changes that occur in how we live and work. Architecture that uses an exoskeleton — or structural elements on the exterior — is a strong first step towards accommodating such change, eliminating internal columns and walls that often constrain the uses around them. Moment connections at columns can do the same while enabling future flexibility for the placement of elevator cores and floor openings. Taller floor-to-floor heights invite daylight deeper into a space — making it more comfortable and usable — while providing a greater range of opportunities for evolving programmatic needs, from offices, to residences, to loft-like workspaces or even labs or industrial use.
Interestingly, it’s not the materials in long-term buildings that need to be more durable, but rather the forward-thinking ideas about how space will be used. Perhaps this conceptual trajectory might force us to rethink our criteria for sustainable features, so that conversion and adaptive reuse would trump bicycle storage and recycled materials.
We can spend less on shelter and, like buying furniture at Ikea, know we will get something that is decently crafted but will last only a few years. Or we can spend more on design, materials, mechanical systems, exterior walls, floor-to-floor heights, and so on and guarantee that our buildings will outlive us and the generations to follow.
Think of it like the sell-by on a grocery item. Perishable foods must be used up quickly, while shelf-stable foods are labeled for the longer term, packaged as nutritional insurance for the future. Perhaps it’s time we establish the same expectations for our buildings, designing with the knowledge that they, too, have an expiration date.
Interested To Learn Some of The Many Benefits of Working With Metal Buildings?
The last thing that you need when you purchase a metal building is to find that the building is not high enough once it is erected. And if you do not understand the terminology you may have no recourse from the supplier.
If you ask a manufacturer, supplier or contractor for a building that is 16 feet high, what exactly do you mean? Are you looking for a building that has an outside side wall height of 16 feet? Do you need 16 feet of CLEAR height inside the building?
Metal building kits are traditionally sold with heights referring to the outside eave height. In the case above, the 16 feet would refer to the height on the outside from the foundation level to the top of the roof purlins (the framing members that stretch from frame to frame.
This means that the interior clear height will be quite a bit less. In a narrow building, the interior height could be only 14 feet. In a much wider metal building, the interior clear height might only be 11 feet! That's right. You could loose five feet or more in height depending on the width (we're talking perhaps 150 feet wide or more) of your building, the required design loading and the particular type of building.
The roof slope of your building can also have an impact on the clear height of your building. You may require only 14 feet in height at the side walls but need 16 feet five or six feet in from the side wall.
All of these factors should be considered when deciding on the height of your new building.
Now I must tell you that the only places that you would loose that much height is at the frame lines. In between the frames, you would have your eave height less the height of the actual roof purlins (usually eight to twelve inches). So, if you needed 15 feet clear for a specific piece of equipment that would be placed right at the sidewall, a 16-foot eave height would often suffice.
The main thing is to discuss all of your needs clearly with your supplier whether he is a manufacturer, contractor or dealer. You owe it to yourself to ensure that the building that you place an order for will suit your needs.